Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Vacuum Filtration, 32mm ID Flange For #3 Pluro Stopper, 24/25 Inner Joint, 65mm Overall Height
Adapter, Vacuum Filtration, 32mm ID Flange For #3 Pluro Stopper, 24/40 Inner Joint, 65mm Overall Height. Adapter used for reduced pressure filtration with plain stem Buchner funnels. Top has a HEAVY DUTY tooled flare to accept the listed size pluro stopper. Hose connection is 10mm OD at the largest serration. Accepts up to 150mL plain stem Buchner Funnels. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER.
Chemglass Life Sciences Adapter, Outer Luer to 24/40 Inner
Adapter, Outer Luer to 24/40 Inner. Adapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes or syringes to a standard taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Hose connection is 10mm OD at the largest serration.
Chemglass Life Sciences 24/40 Outer Joint Adapter
24/40 Outer Joint Adapter. Adapter allows for 1/8" OD PTFE tubing to be connected to glassware via a standard taper joint. Useful with vacuum manifolds or any other air sensitive transfer applications. Adapter can also be used with standard luer lock stainless steel needles; See CG-3075. Adapters are supplied with a CG-1055-20 female luer to 1/4" - 28 peek fitting. Ferrules, nuts and tubing must be ordered separately.
Chemglass Life Sciences Top Outer: 24/40 Lower Inner: 24/40
Adapter, splash guard, with fritted disc. Top Outer: 24/40 Lower Inner: 24/40. Similar to CG-1041, but with the addition of an Extra Coarse fritted disc between the lower inner and top outer joint.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Style "B", 105°, 14/20 Joint Size
Adapter, Vacuum Take-Off, Style "B", 105¿, 14/20 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105¿ angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Adapter, Inlet, 24/40 Inner Joint, Bent 90°, 200mm Length Below Joint
Adapter, Inlet, 24/40 Inner Joint, Bent 90¿, 200mm Length Below Joint. Allows introduction of reactants below the interior surface. Hose connection has a O.D. of 10mm at the largest serration and is bent downward at a 90¿ angle to the inner joint.
Chemglass Life Sciences Adapter, Distillation, 24/40 Joint Size, Distance Between Inner Joints/200mm
Adapter, Distillation, 24/40 Joint Size, Distance Between Inner Joints/200mm. With two standard taper inner joints, parallel, and at a 75º angle to the connecting tube.
Chemglass Life Sciences Joint, 35/25, Polished Socket, Clamp Size 35, 28mm Tubing
Joint, 35/25, Polished Socket, Clamp Size 35, 28mm Tubing. For use with CG-122, o-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.
Chemglass Life Sciences 10/30 Inner Joint, Full Length, on 8mm OD x 1.5mm W tubing
10/30 Inner Joint, Full Length, on 8mm OD x 1.5mm W tubing. Standard Taper ground Inner Joint, Full Length.
Chemglass Life Sciences Adapter fits bushing size 25
Adapter fits bushing size 25. Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples into a conventional round bottom flask. Joint sizes other than 24/40 are available upon request. Adapter is supplied complete with one CG-362 open top bushing of the listed size and Viton o-ring.
World Precision Instrument Male Luer Fitting for 1/16" ID Tubing
- Male Luer Fitting for 1/16" ID Tubing, Polypropylene
- Package of 100
World Precision Instrument Male Luer Fitting for 3/32" ID Tubing
- Male Luer Fitting for 3/32" ID Tubing, Polypropylene
- Package of 100
Chemglass Life Sciences Joint Size: 45/50, Total Length: min. 150 (mm), max. 165(mm), Bellows Adapter
Adapter is constructed completely of PTFE and is ideal for eliminating stress between standard joints. Can be bent up to 120¿. Top outer and lower inner are of the same size. Joint Size: 45/50,Total Length: min. 150 (mm), max. 165(mm)
Chemglass Life Sciences Connector, Lattice
Connector, Lattice. Angled adjustment screws allow easy set-up and prevent slippage or misalignment. Two U-shaped slots permit rods or clamps of 1/2” (13mm) maximum diameter to be joined in a 90° corner joint or cross-connection with components in close proximity to minimize wasted space. Each rod or clamp adjusts independently for easy installation.
Chemglass Life Sciences Joint Size: 24/40, Total Length: min. 120 (mm), max. 137 (mm), Bellows Adapter
Adapter is constructed completely of PTFE and is ideal for eliminating stress between standard joints. Can be bent up to 120¿. Top outer and lower inner are of the same size. Joint Size: 24/40, Total Length: min. 120 (mm), max. 137 (mm)